3DLAC Adhesive Spray 400 ML
- In stock, ready to ship
30 Dagen Retourtermijn, probeer zonder risico!
30 dagen retourbeleid, SSL-beveiligde checkout
Snelle Verzending
Voor 17:00 besteld, volgende dag in huis
Veilige Betaalmethode
Betaal achteraf in 3 termijnen - Rentevrij - Geen extra kosten
Hoog Beoordeeld
9,3 Beoordeeld door klanten
For perfect adhesion to the print bed
3DLAC 3D printer adhesive spray – optimal adhesion without warping
3DLAC is a high-quality adhesive spray based on ultra-fast-drying thermoplastic copolymers, specifically developed for FFF/FDM 3D printing. This spray ensures strong and uniform adhesion of your print to the build plate and effectively helps to prevent warping and detachment – even for larger or technical prints.
Why choose 3DLAC?
-
Very strong fixation during printing
-
Quick and easy application
-
Great coverage – suitable for entire build plates
-
Compatible with multiple surfaces (glass, PEI, metal, etc.)
-
Cleanable with water
-
Fast-drying and ready to print immediately
-
Long-lasting use – up to approx. 400 applications
-
Suitable for multi-materials (PLA, PETG, ABS, ASA, Nylon, composites)
Applications
3DLAC is suitable for a wide range of 3D printing materials and build plates. The adhesion strength may vary per material. For large parts or technical filaments, it is recommended to perform a test print beforehand.
💡 Tip: a slightly thicker layer can further strengthen the adhesion. Always allow the build plate to cool down before removing the object; light tapping helps with easy release.
Instructions for use
-
Clean – Ensure the build plate is clean and grease-free.
-
Shake – Shake the 3DLAC aerosol can well before use.
-
Apply – Keep the can upright at a distance of 20–30 cm and apply a thin, even layer.
-
Dry – Wait a few seconds until the spray is dry and tacky.
-
Print – Start the printing process with optimal adhesion.
-
Remove – After cooling, the print can be easily removed.
Technical specifications
-
Binder: Thermoplastic
-
Color: Transparent
-
Touch-dry: ± 10 seconds
-
Fully dry: ± 1 minute
-
Dry film thickness: ± 15 μm per layer
-
Adhesion: 4B
-
Theoretical yield: approx. 2 m²
-
Thinner: Isopropyl alcohol
-
Heat resistance: Up to 200 °C
-
Shelf life: > 5 years
-
Overdosing: Possible (increases adhesion)
Storage & advice
Store 3DLAC in a cool, dry place, away from direct sunlight. Close the cap tightly after use for long service life and consistent performance.
3DLAC is the reliable solution for a stable first layer and consistent 3D printing results. Perfect for both hobbyists and professional users.
Safety and Hazard Instructions
Signal word: danger
Signal word: danger
Safety instructions:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P264 - Wash thoroughly with plenty of water after handling.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
- P501 - Dispose of contents/container in accordance with local regulations.
Hazard instructions:
- H222 - Extremely flammable aerosol.
- H229 - Pressurized container: may burst if heated.
- H319 - Causes serious eye irritation.
- H336 - May cause drowsiness or dizziness.
Free Delivery
- Shipping costs are €5.95. If your order is over €99, shipping is free.
- Order before 5:00 PM, delivered the next day
Simple Return Process
- Product not what you expected? No problem! You can easily return the product you purchased within 30 days.
We offer a 2-year warranty on our products.
